S.I. Tech, Inc.TTL over Fiber Optic Modems (Bit-Driver®)

 

 

 

Product Index

Web Site Content

 

The following TTL to Fiber Modems are available from S.I. Tech. For these units, multimode is standard, single mode is optional. Refer to the data sheet and table below for further information.

2817-T/R Mini Bit-Driver

TTL to Fiber Modems

Product

Description

2817-T/R

Photo

  1. Fiber Optic Transmitter/Receiver Pair
  2. Max Data Rate is 20 Mbps
  3. BNC input 10K-Ohm to ground. BNC output TTL levels into 50 Ohms.
  4. Multimode is standard, Single mode optional

2856

Photo

  1. Asynchronous, Simplex or Full Duplex Stand Alone Bit-Driver®
  2. Max Data Rate is 20 Mbps
  3. 50 or 75-Ohm Coax, BNC Bulkhead Jack
  4. Up to four units can be placed in a 1U high rack (2856-4R)
  5. Multimode is standard, Single mode optional

Modem (502 KB)

View Short Haul Modems & TTL to Fiber Solutions in 1 file

Note: Adobe Acrobat Reader is needed to view the technical data sheets. Click on model number to view specifications.

S.I. Tech, Bit-Driver®, and Fiber Cluster® are registered trademarks of S.I. Tech, Inc.
©2008 S.I. Tech, Inc. All copy and images.