Remote peripheral equipment link beyond 10 Km using the 2082 Optical Repeater. |
Document: 10090
Category: 2082 Optical Repeater/Converter
Date Posted: 04/12/07 |
Problem
We have a requirement to extend (Nortel Product) fiber remote peripheral equipment link beyond 10 Km. The bit stream is ISOCHRONOUS SDH @ 155Mbp/s rate. Will the 2082 support this stream/protocol?
Solution
The 2082 will work with this bit stream. Just make sure the wavelength on your equipment is 1310nm as we have to match that. (We are assuming you are not using 1550nm.) We also assume you are using single mode fiber.
Back to Technical Support
|