Current draw on Series 3000. |
Document: 10072
Category: Series 3000 Signal Distribution System
Date Posted: 05/10/05 |
Problem
I need to know how many amps the S.I. Tech Bit-Driver 3000 uses so I can figure out how big of a UPS I need to
get.
Solution
The current draw in the 3000 Rack depends upon the number of cards installed. Maximum number of cards is 16.
We use a 0.5 amp fuse on 110VAC side. The boards are at 5 volts, typically 100 mA each.
Back to Technical Support
|