Data switchboard that needs to communicate with multiple workstations. |
Document: 10026
Category: 2856 TTL to Fiber Bit-Driver
Date Posted: 09/06/02 |
Problem
I have a data switchboard that communicates with several workstations via a
5 volt, 10Mhz, phase modulated (0 or 180 deg.), square wave into 75 ohms. I
will soon need to install more workstations at a much greater distance. Is
there anything available which will convert this signal to fiber optics and
back again? Bi-directional and/or multi-channel would be pluses.
Solution
The S.I. Tech model #2856-TTL to Fiber Bit-Driver can handle this assuming this is a digital (not analog) signal. Due to the high frequency, it is not possible to multiplex many channels.
Back to Technical Support
|