S.I. Tech, Inc.Model 2853 - Arcnet to Fiber Optic Modem

2853 Bit-Driver

Operation Mode: Synchronous, simplex or full duplex, 2.5 Mbps
Input/Output Interface: 93 ohm coaxial cable BNC
bulkhead jack
Transmission Line Interface:
2 ST fiber optic receptacles
(SMA option)
Transmission Distance: See distance chart
Transmitter Output Power: 30 microwatts into 50 micron fiber
Wavelength: 820 nanometers (1300 nm option)
Receiver Wavelength: 820 nanometers (1300 nm option)
Minimum Sensitivity: 3 microwatts @ 820 nanometers
Bit Error Rate: 10-9
Operating Temperature: 0 °C to 50 °C
Metal Enclosure: 7.5" x 7" x 3"
(19 x 17.8 x 7.6 cm)
Weight: 3 lbs. (1.36 kg)
Input Power: 110 VAC 50/60 Hz
230V Version: 2853V
Rack Mount Version: 2353 (3000 rack)
The S.I.Tech 2853 Bit-Driver® is designed to work with coaxial cable "Arcnet". Model 2853 is a coax to fiber optic transmitter/receiver full duplex product implementing "Arcnet" networking scheme. The normal operating data rate is 2.5 Mbps.

This fiber optic Bit-Driver product eliminates many disadvantages of coaxial cable, especially EMI/RFI, high attenuation (high signal loss), limiting distance between nodes of Arcnet (2000 feet coax), ground loops (electrical isolation with fiber), weight, and potential lightning damage outdoors between buildings.

S.I.Tech Model 2853 is a stand alone product allowing easy change from coax to fiber: Simply disconnect the BNC connector and plug into the input/output port.


UL Listed. Meets FCC requirements of Class A, Part 15 Computing Devices Standard.
Specifications subject to change without notice.

View Complete Technical Data Sheet (PDF)

Return


Contact Information: Phone: 630.761.3640 Fax: 630.761.3644 Email: sales@sitech-bitdriver.com
S.I. Tech, Bit-Driver®, and Fiber Cluster® are registered trademarks of S.I. Tech, Inc.
©2015 S.I. Tech, Inc. All copy and images.