SYSTEM
Transmission:
|
Up to 6500 ft. (2 Km) with suitable graded index fiber optic cable or 10 Km using single mode fiber |
Typical Bit Error Rate:
|
Better than 10-9 |
ELECTRICAL SIGNAL INPUT/OUTPUT
FOR TRANSMITTER AND RECEIVER
Format:
|
TTL - 16 Channel |
Connector:
|
BNC |
Data Rate:
|
100 Kbps to 50 Mbps |
Input impedance:
|
TTL levels 10 K-Ohm |
Output Impedance:
|
TTL levels into 50 Ohm |
Input Power:
|
110/230 VAC, 12W |
OPTICAL TRANSMITTER
LED Current:
|
30 microwatts (-15 dBm) into 62.5 micron fiber |
Wavelength:
|
820 nanometers (1300 nm option) |
Emitter Type:
|
LED |
Optical Connector:
|
ST |
OPTICAL RECEIVER
Wavelength:
|
820 nm (1300 & 1550 nm option) |
Minimum Sensitivity:
|
(BER 10-9) 3 microwatt (-25 dBm) @ 820 nanometers |
Optical Connector:
|
ST |
Operating Temperature:
|
0°C to 50°C (optional extended temp for multimode) |
Size:
|
17"W x 3.5"H x 7.5"D
(43.2 X 8.6 X 19.0 cm) |
Weight:
|
6 lbs. (3Kg) |
|
TRANSMISSION LINE INTERFACE
Operating distance is dependent upon optical fiber core diameter and the cable's optical attenuation.
The table below indicates three cables that may be used at any data rate. These cables are available in connectorized
assemblies to meet the exact configuration of your application.
S.I.Tech offers complete links including fiber optic cable, connectors, cable assemblies, and
Bit-Drivers®.
S.I.Tech #2816-16R-T & R can be used as 16 TTL channels with 16 fibers or using WDM, 8
fibers can be used.
UL Listed. Meets FCC requirements of Class A, Part 15 Computing Devices Standard.
Specifications subject to change without notice.
Power Consumption
50% Duty Cycle
|
No TTL Load
|
50Ohm TTL Load
|
2816 T
|
60mA
|
X
|
2816 R
|
50mA
|
110mA
|
|