|
IBM Systems 3/X & AS/400, & 5251 Controller
|
Operation Mode:
|
Synchronous, half/full duplex,
1 Mbps serial bi-phase data each port |
|
Input/Output Interface:
|
100 Ohm twinax bulkhead jack, IBM protocol |
|
Number of Channels:
|
2 |
|
Transmission Line Interface:
|
2 ST fiber optic receptacles (SMA option) |
|
Data link Speed:
|
2 Mbps |
|
Transmission Distance:
|
2 Km (6600 ft.), (5 Km option) |
|
Transmitter Output Power:
|
30 microwatts into 50 micron fiber |
|
System Wavelength:
|
850 nanometers (1300nm option) |
|
Receiver Sensitivity:
|
3 µw at 10-9 bit error rate |
|
Operating Temperature:
|
0 °C to 50 °C |
|
Metal Enclosure:
|
7.5" X 7.0" X 3.0"
(17.8 X 14.0 X 7.6 cm)
Rack mount option |
|
Weight:
|
4 lbs. (1.8 Kg) |
|
Input Power:
|
110/220 VAC, 50/60 Hz, 20 W detachable power cord, power supply meets UL, CSA, VDE, & IEC requirements |
|
230V Version:
|
9302V |
|
S.I Tech Model 9302 multiplexer Bit-Driver is designed to work with IBM System 3/X, AS/400, and
5251 controller using twinax cable. Model 9302 Bit-Driver is a 2 channel twinax to fiber optic transmitter/receiver
full duplex multiplexer product implementing IBM Protocol. Normal operating data rate is 1 Mbps on each port.
This fiber optic Bit-Driver product eliminates many disadvantages of twinax, especially EMI/RFI, ground loops (electrical
isolation with fiber), high attenuation (high signal loss), limiting distance between nodes of system, and potential
lightning damage outdoors between buildings.
S.I.Tech Model 9302 is a stand alone product allowing easy change from twinax to fiber: Simply disconnect twinax
cables and connect to model 9302 input/output port. Model 9302 comes with power supply and status indicators.
IBM and AS400 is a registered trademark of International Business Machines Corp.
UL Listed. Meets FCC requirements of Class A, Part 15 Computing Devices Standard.
Specifications subject to change without notice.
|
Model 9302 - Twinax to Fiber Optic Multiplexer