Operation Mode: |
Synchronous, half/full duplex
T1 - 1.54 Mbps
E1 - 2.048 Mbps |
Input/Output Interface: |
T1, RJ48C 100 Ohm Twisted Pair
E1, BNC 75 Ohm Coax or
E1, RJ48C 120 Ohm Twisted Pair |
Transmission Line Interface: |
2 ST fiber optic receptacles |
Connector Options: |
ST, SC, and FC |
Transmission Distance: |
See distance chart |
Distance Options: |
5km, 10km, or 20km |
Transmitter Output Power: |
30 Microwatts into 50 Micron
fiber (820nm & 1300nm options) |
Receiver Wavelength: |
820 nm or 1300 nm |
Minimum Sensitivity: |
3 Microwatts @ 820 nanometers |
Bit Error Rate: |
10-9 |
Operating Temperature: |
0°C to 50°C |
Mean Time Between Failure: |
MTBF @ 25 C = 800,000 Hours
MTBF @ 50 C = 300,000 Hours
[Bellcore test method used] |
Enclosure: |
19" Rack holds 12 cards |
Card Size: |
Eurocard 3.9" x 6.8"
(9.9 x 17.3 cm)
3001 Rack |
Weight: |
1/2 lb.(200.grams) |
Input Power: |
3 Watts Max |
Related Products: |
2890 (T1) / 2891 (E1) |
|
Features:
- T1 AMI or B8ZS, E1 AMI or HDB3
- Status indicators and alarms for ease of use and maintenance
- Twisted pair (T1 and E1) or BNC (E1 only) electrical interface options
- AMI or zero suppression line codes
- Multimode or single mode fiber interface options
- Toggle switches for most control settings and rotary switches for T1 line build out settings
- Up to 10 Km at low cost
The S.I.Tech 2390/2391 Bit-Driver is designed to work with T1 or E1 systems. Model 2390/2391
is a T1 or E1 to fiber optic transmitter/receiver full duplex product implementing T1 or E1 protocol. Nominal
operating data rate is 1.544 Mbps.
This fiber optic Bit-Driver product eliminates many disadvantages of metallic T1 and E1 signals,
especially EMI/RFI, ground loops (electrical isolation with fiber), high attenuation (high signal loss), limiting
distance between nodes of system, and potential lightning damage outdoors between buildings.
S.I.Tech Model 2390/2391 is a stand alone or rack mount product allowing easy change from T1
or E1 to fiber. Simply connect T1 or E1 cable to model 2390/2391 input/output port.
UL Listed. Meets FCC requirements of Class A, Part 15 Computing Devices Standard.
Specifications subject to change without notice.
|