Operating Mode: |
10 Base-T/100 Base-TX and
10 Base-FL/100 Base-FX,
Auto 10/100 Sensing |
Input/Output Interface: |
Shielded RJ45 |
Transmission Line Interface: |
ST optical connector is standard (SC Option), (ST, SC, or FC for SM) |
Transmission Distance: |
6600 ft. (2 km) |
Transmitter Output Power: |
30µw into 62.5/125 micron fiber |
System Wavelength: |
1300 nm Multimode (Single mode Option) |
Data Rate: |
10/100 Mbps |
Bit Error Rate: |
10-9 |
Receiver Sensitivity: |
10 Microwatts @ 1300 nanometers |
Operating Temperature: |
0 °C to 50 °C |
Input Power: |
110VAC/230VAC (Rack) |
Card Size: |
Eurocard 3.9" X 6.8"
(9.9 X 17.3 cm) |
Weight: |
0.5 lb (200 grams) |
Meets FCC requirements of Class A, Part 15 Computing Devices Standard.
Specifications subject to change without notice.
|
Features:
- Supports 10 Base-T/100 Base-TX and 10 Base-FL/100 Base-FX Standard
- Eurocard, 3001 rack holds 12 cards
- Power, Link Status, Activity, and Collision LED indicators
- ST or SC optical connections (ST, SC, or FC options for Single Mode)
- Auto senses between 10 and 100 Mbps speeds
- Plug & Play - No Setup Required
S.I.Tech 2350-10/100A Ethernet media converter is a card version of 2150-10/100A for connection
of Ethernet based equipment over fiber optic cable at 10 Base-T/100 Base-TX and 10 Base-FL/100 Base-FX. It uses
ST or SC for Multimode fiber and ST, SC, or FC for Single mode fiber. Model 2350-10/100A auto senses and switches
between 10 and 100 Mbps. The unit contains LED indicators to provide visible verification of transmission status
and media converter functions.
Note:
The 2350-10/100A and 2150-10/100A auto negotiates between 10 Base-T and 100 Base-Tx ports and chooses the best
mode of operation (half/full duplex, 10/100 Mbps). If one of the connecting ports also supports operation at 1000
Base-T - Gigabit (e.g., 10/100/1000 Mbps NIC), the 2150-10/100A pair will auto negotiate to the best mode of
operation not exceeding 100 Mbps - however, one of the connecting ports must be limited to 10 or 100 Mbps operation.
|