SYSTEM
Transmission: |
Up to 6500 ft. (2 Km) with suitable graded index fiber optic cable or 10 Km using single mode fiber |
Typical Bit Error Rate: |
Better than 10-9 |
ELECTRICAL SIGNAL INPUT/OUTPUT
FOR TRANSMITTER AND RECEIVER
Format: |
TTL |
Connector: |
BNC |
Data Rate: |
Up to 50Mbps |
Input Impedance: |
TTL levels 10K-Ohm or 75-Ohm
Jumper J4
Position 1: 75-Ohm (Default)
Position 3: 10K-Ohm
|
Output Impedance: |
TTL levels into 50-Ohm |
Input Power: |
10-32 V 1W Max.
Optional 5VDC 1W |
OPTICAL TRANSMITTER
Power: |
30 microwatts (-15 dBm) into 62.5 micron fiber |
Wavelength: |
820 nanometers (1300nm or 1550nm option) |
Emitter Type: |
LED |
Optical Connector: |
ST |
OPTICAL RECEIVER
Wavelength: |
820nm (1300nm & 1550nm option) |
Sensitivity: |
(BER 10-9) 3 microwatt (-25 dBm) @ 820 nanometers |
Maximum Sensitivity: |
10 microwatts |
Optical Connector: |
ST |
Operating Temperature: |
0°C to 50°C |
Size: |
3.9" X 6.8" (9.9 X 17.3cm) Eurocard |
|
TRANSMISSION LINE INTERFACE
Operating distance is dependent upon optical fiber core diameter and the cable's optical attenuation. The table
below indicates three cables that may be used at any data rate. These cables are available in connectorized assemblies
to meet the exact configuration of your application.
S.I.Tech offers complete links including fiber optic cable, connectors, cable assemblies, and Bit-Drivers®.
UL Listed. Meets FCC requirements of Class A, Part 15 Computing Devices Standard.
Specifications subject to change without notice.
View Complete Technical Data Sheet (PDF)
Return
|