||10 Base-T/100 Base-TX and 10 Base-FL/100 Base-FX, Auto 10/100 Sensing
|Transmission Line Interface:
||ST optical connector is standard (SC Option), (ST, SC, or FC for SM)
||See distance chart
|Transmitter Output Power:
||12 Microwatts into 62.5/125 micron fiber (-19dBm)
||1300 nm Multimode (Single mode Option)
||1 Microwatt @ 1300 nanometers (-30dBm)
||0°C to 50°C
||0.5 lb (225 grams)
||DC Power: 10 to 32VDC, 4 Watts or External with power supply (S.I.Tech #2164 - 100 to 240 VAC, 50/60 Hz, to 12VDC, UL, CSA, CE, & TUVGS Listed)
||5.75" X 3.8" X 1.0"
(14.6 X 9.6 X 2.54 cm)
- Supports 10 Base-T/100 Base-TX and 10 Base-FL/100 Base-FX Standard
- Small size
- Power, Link Status, Activity, and Rate LED indicators
- ST or SC optical connections (ST, SC, or FC options for Single Mode)
- Auto senses between 10 and 100 Mbps speeds
- Plug & Play - No Setup Required
S.I.Tech 2150 Ethernet media converter is a compact adapter for connection of Ethernet based equipment over fiber
optic cable at 10 Base-T/100 Base-TX and 10 Base-FL/100 Base-FX. It uses ST or SC for Multimode fiber and ST, SC,
or FC for Single mode fiber. Model 2150 auto senses and switches between 10 and 100 Mbps. The unit contains LED
indicators to provide visible verification of transmission status and media converter functions.
The 2150-10/100A pair auto negotiates between 10 Base-T and 100 Base-Tx ports and chooses the best mode of operation
(half/full duplex, 10/100 Mbps). If one of the connecting ports also supports operation at 1000 Base-T - Gigabit
(e.g., 10/100/1000Mbps NIC), the 2150-10/100A pair will auto negotiate to the best mode of operation not exceeding 100 Mbps - however,
one of the connecting ports must be limited to 10 or 100 Mbps operation.
UL Listed. Meets FCC requirements of Class A, Part 15 Computing Devices Standard.
Specifications subject to change without notice.